Removal

HEATING / AIR CONDITIONING: ROOM TEMPERATURE SENSOR: REMOVAL; 2013 MY Corolla [07/2012 -]

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

3. REMOVE STEERING WHEEL ASSEMBLY

Removal

4. REMOVE LOWER STEERING COLUMN COVER Removal

5. REMOVE UPPER STEERING COLUMN COVER Removal

6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH Removal

7. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

8. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Removal

9. REMOVE NO. 1 SWITCH HOLE BASE (w/o Smart Key System) Removal

10. REMOVE NO. 1 SWITCH HOLE BASE (w/ Smart Key System) Removal

11. REMOVE ROOM TEMPERATURE SENSOR

(a) Disconnect the connector.





(b) Disengage the air hose.

(c) Disengage the 2 claws and remove the room temperature sensor.