Operation Check

AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (w/ Multi-display without DVD Player): OPERATION CHECK; 2013 MY Corolla [07/2012 -]

1. CHECK PANEL & STEERING SWITCH

HINT
* The radio and display receiver assembly panel switches and steering switches are checked in the following procedure.
* Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle screen.

(a) Enter diagnostic mode Audio and Visual System (W/ Multi-Display Without DVD Player).

(b) Select "Function Check/Setting" from the "Service Menu" screen.





(c) Select "Panel & Steering Switch" from the "Function Check/Setting I" screen.





(d) Panel & Steering Switch Check Mode





Screen Description





(1) Operate each switch and check that the switch conditions are correctly displayed.

NOTICE:
When the "SETUP" switch is pressed and held for 3 seconds or more, diagnostic mode will be canceled.

2. CHECK TOUCH SWITCH

HINT
* The touch switches on the screen are checked in the following procedure.
* Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle screen.

(a) Enter diagnostic mode Audio and Visual System (W/ Multi-Display Without DVD Player).

(b) Select "Function Check/Setting" from the "Service Menu" screen.





(c) Select "Touch Switch" from the "Function Check/Setting I" screen.





(d) Touch Switch Check





(1) Touch the display anywhere in the open area to perform the check when the "Touch Switch Check" screen is displayed.

HINT
* A "+" mark is displayed where the display is touched.
* The "+" mark remains on the display even after the finger is removed.

3. CHECK MICROPHONE & VOICE RECOGNITION

HINT
* The microphone and microphone input level are checked in the following procedure.
* Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle screen.

(a) Enter diagnostic mode Audio and Visual System (W/ Multi-Display Without DVD Player).

(b) Select "Function Check/Setting" from the "Service Menu" screen.





(c) Select "Mic & Voice Recognition" from the "Function Check/Setting I" screen.





(d) Microphone & Voice Recognition Check





Screen Description





(1) When speaking into the microphone, check that the microphone input level meter changes according to the input level.

HINT
The microphone is active at all times when this screen is displayed.

4. CHECK COLOR BAR

HINT
* The display color on the screen is checked in the following procedure.
* Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle screen.

(a) Enter diagnostic mode Audio and Visual System (W/ Multi-Display Without DVD Player).

(b) Select "Function Check/Setting" from the "Service Menu" screen.





(c) Select "Color Bar" from the "Function Check/Setting I" screen.





(d) Color Bar Check Mode





(1) Select a color bar from the "Color Bar Check Mode" screen.

(2) Check the display color.

HINT
* The entire screen turns to the color or stripe selected.
* Touching the display will return to the "Color Bar Check Mode" screen.

5. CHECK VEHICLE SIGNAL

HINT
* Vehicle signals received by the radio and display receiver assembly are checked in the following procedure.
* Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle screen.

(a) Enter diagnostic mode Audio and Visual System (W/ Multi-Display Without DVD Player).

(b) Select "Function Check/Setting" from the "Service Menu" screen.





(c) Select "Vehicle Signal" from the "Function Check/Setting I" screen.





(d) Vehicle Signal Check Mode





Screen Description





HINT
* Only items sending vehicle signals will be displayed.
* This screen displays vehicle signals input to the radio and display receiver assembly.
* This screen is updated once per second when vehicle input signals change.

(1) When the "Vehicle Signal Check Mode" screen is displayed, check all the vehicle signal conditions.

6. CHECK HANDS-FREE VOICE QUALITY AND VOLUME SETTING

HINT
* The hands-free volume of a "Bluetooth" compatible phone can be adjusted using the following procedure.
* Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle screen.

(a) Enter diagnostic mode Audio and Visual System (W/ Multi-Display Without DVD Player).

(b) Select "Function Check/Setting" from the "Service Menu" screen.





(c) Select "HF Voice Quality Setting" from the "Function Check/Setting I" screen.





(d) Hands-Free Voice Quality Setting (Receive/Send Voice Level adjustment)





Screen Description





NOTICE:
Sound quality may deteriorate when the receive voice or send voice level is changed more than necessary. For this reason, check that the received voice or sent voice quality is still acceptable after changing this setting.

(1) If the voice level is low, press the up button, and if the voice level is loud, press the down button.

HINT
* Each voice level setting is reflected when going back to the normal mode.
* The voice level adjustment ranges from -5 to +5 (for Pioneer, Panasonic or w/o HD Radio for FUJITSU TEN).
* The "Receive Voice Level" adjustment ranges from -5 to 0 (w/ HD Radio for FUJITSU TEN).
* The "Send Voice Level" adjustment ranges from -5 to +2 (w/ HD Radio for FUJITSU TEN).
* The initial level is "0".

(e) Hands-Free Voice Quality (Voice Quality Type adjustment)





Text in Illustration





(1) If necessary, refer to the table below to adjust the voice quality type with the numeric keypad.

(2) When adjusting the settings, use the number pad on the screen to input the voice quality type according to the table.

Setting





HINT
* Refer to the "Unit Version Information" screen to confirm radio and display receiver assembly manufacturer information.
* The type of adjustments that can be made using voice quality type adjustment only adjust the sound quality of your voice that the other party hears. It cannot adjust the sound quality of the other party's voice that you hear.
* The default value is "0000".
* Settings will be applied when the normal screen is returned to.
* When multiple setting values are available, the higher the setting value, the bigger the effect. However, as the positive effects increase, so do the negative effects.
* If voice quality type values that are not in the table are input, the setting will not be applied and a positive effect may not be gained.
* If the quality of phone calls decreases due to the changed settings, return the settings to "0000" by pressing the "INIT" switch.

7. CHECK UNIT VERSION INFORMATION

HINT
Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle screen.

(a) Enter diagnostic mode Audio and Visual System (W/ Multi-Display Without DVD Player).

(b) Select "Service Information" from the "Service Menu" screen.





(c) Select "Version Information" from the "Service Information" screen.





(d) Press the "Push" switch.





(e) Unit Version Information





Screen Description





HINT
Depending on the manufacturer, some component names and versions will be displayed differently.