Tire Monitoring System: Service and Repair

How to initialize the tire pressure warning system

[1] Park the vehicle in a safe place and turn the engine switch off.
Initialization cannot be performed while the vehicle is moving.

[2] Adjust the tire inflation pressure to the specified cold tire inflation pressure level.

[3] Make sure to adjust the tire pressure to the specified cold tire inflation pressure level. The tire pressure warning system will operate based on this pressure level.

[3] Turn the engine switch to IGNITION ON mode.

[4] Press and hold the tire pressure warning reset switch until the tire pressure warning light blinks slowly 3 times.

[5] Wait for a few minutes with the engine switch in IGNITION ON mode and then turn the engine switch off.