Maintenance Required Lamp/Indicator: Service and Repair

Reset the Maintenance Data (U.S.A. only)
After the required maintenance is performed according to the maintenance schedule, please reset the maintenance data.
To reset the data, follow the procedures described below:

Without Navigation

[1] Turn the engine switch off with the trip meter A reading shown.

[2] While pressing the trip meter reset knob, turn the engine switch to IGNITION ON mode

[3] Continue to press and hold the knob until the trip meter displays "000000".


With Navigation





[1] Press the "SETUP" button.





[2] Touch "Vehicle" on the "Setup" screen.





[3] Touch "Maintenance" on the "Vehicle Settings" screen.





[4] Touch the desired screen button.

- When the vehicle needs to be serviced, the screen button color will change to orange.





[5] Input the conditions.

[6] Touch "OK".
The screen then returns to the "Maintenance" screen