Rear Power Window RH does not Operate with Rear Power Window Switch RH (from 07/2011)

WINDOW / GLASS: POWER WINDOW CONTROL SYSTEM (for Hatchback): Rear Power Window RH does not Operate with Rear Power Window Switch RH
- Rear Power Window RH does not Operate with Rear Power Window Switch RH

DESCRIPTION

If the rear RH side manual UP / DOWN function does not operate, a malfunction may exist in the rear power window regulator motor assembly RH, rear power window regulator switch assembly RH, power window regulator master switch assembly or wire harness.

WIRING DIAGRAM





INSPECTION PROCEDURE

NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE

1. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH

(a) Inspect the rear power window regulator switch assembly RH Rear Power Window Switch (for Hatchback).

NG -- REPLACE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH Removal (from 07/2011)
OK -- Continue to next step.

2. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

(a) Inspect the rear power window regulator motor assembly RH Hatchback Rear Door.

NG -- REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH Removal (from 07/2011)
OK -- Continue to next step.

3. CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH - P/W RELAY)

(a) Disconnect the R1 rear power window regulator switch assembly RH connector.





(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:





Text in Illustration





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

4. CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH - REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH)

(a) Disconnect the R1 rear power window regulator switch assembly RH connector.

(b) Disconnect the R2 rear power window regulator motor assembly RH connector.

(c) Measure the resistance according the value(s) in the table below.

Standard Resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

5. CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH - POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY)

(a) Disconnect the R1 rear power window regulator switch assembly RH connector.

(b) Disconnect the G20 power window regulator master switch assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY Removal (from 07/2011)