Pinout Values and Diagnostic Parameters

WINDOW / GLASS: WINDOW DEFOGGER SYSTEM (for Hatchback): TERMINALS OF ECU

1. CHECK NO. 2 HEATER CONTROL SUB-ASSEMBLY





(a) Disconnect the D129 No. 2 heater control sub-assembly connector.

(b) Measure the voltage and resistance according to the value(s) in the table below.





* If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the No. 2 heater control sub-assembly connector.

(d) Measure the voltage according to the value(s) in the table below.





* If the result is not as specified, the No. 2 heater control sub-assembly may have a malfunction.