Disassembly (from 07/2011)

C50 MANUAL TRANSMISSION / TRANSAXLE: SHIFT AND SELECT LEVER SHAFT (for Hatchback): DISASSEMBLY

1. REMOVE NO. 2 SELECT SPRING SEAT





(a) Using a screwdriver, remove the E-ring, No. 2 select spring seat, and compression spring from the shift and select lever shaft.

2. REMOVE NO. 2 SHIFT LEVER INNER





(a) Using a pin punch (dia5 mm) and a hammer, remove the slotted spring pin and No. 2 shift lever inner from the shift and select lever shaft.

HINT
Check the orientation of the No. 2 shift lever inner.

3. REMOVE NO. 1 SHIFT LEVER INNER





(a) Using a pin punch (dia5 mm) and a hammer, remove the slotted spring pin, No. 1 shift lever inner, and shift inter lock plate from the shift and select lever shaft.

HINT
Check the orientation of the No. 1 shift lever inner.

4. REMOVE SELECT INNER LEVER





(a) Using a pin punch (dia5 mm) and a hammer, remove the slotted spring pin, select inner lever, compression spring, and No. 1 select spring seat from the shift and select lever shaft.

HINT
Check the orientation of the select inner lever.

5. REMOVE SELECT SPRING NO. 1 SEAT SHAFT SNAP RING





(a) Using 2 screwdrivers and a hammer, remove the select spring No. 1 seat shaft snap ring.