Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Removal (from 07/2011)





1NZ-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR (for Hatchback): REMOVAL

1. REMOVE NO. 2 CYLINDER HEAD COVER Removal (from 07/2011)

2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH NO. 1 AIR CLEANER HOSE Removal (From 07/2011)

3. REMOVE BATTERY





(a) Disconnect the battery terminal.

(b) Remove the 2 nuts and the battery clamp.

(c) Remove the battery.

4. REMOVE CAMSHAFT POSITION SENSOR

(a) Disconnect the camshaft position sensor connector.





(b) Remove the bolt and camshaft position sensor.