Installation (from 07/2011)

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: YAW RATE AND DECELERATION SENSOR (for Hatchback): INSTALLATION

1. INSTALL YAW RATE AND DECELERATION SENSOR

(a) Install the yaw rate and deceleration sensor with the 2 nuts.

Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)

NOTICE:
Make sure that the sensor is at the correct angle when installing.

(b) Connect the yaw rate and deceleration sensor connector.

2. INSTALL YAW RATE SENSOR PROTECTOR

(a) Install the yaw rate sensor protector with the 2 nuts.

Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)

3. INSTALL REAR CONSOLE BOX ASSEMBLY

Installation (from 07/2011)

4. PERFORM YAW RATE SENSOR ZERO POINT CALIBRATION

Vehicle Stability Control System (for Hatchback with Separate Type Yaw Rate Sensor)