Pinout Values and Diagnostic Parameters

SEAT BELT: SEAT BELT WARNING SYSTEM (for Hatchback): TERMINALS OF ECU

1. COMBINATION METER ASSEMBLY





(a) Disconnect the D100 combination meter assembly connector.

(b) Measure the voltage and resistance according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction in the wire harness.

(c) Reconnect the combination meter assembly connector.

(d) Measure the check for pulse according to the value(s) in the table below.





If the result is not as specified, the combination meter assembly may have a malfunction.

2. AIRBAG SENSOR ASSEMBLY (for Hatchback with VSC/Built-in Type Yaw Rate Sensor)









3. AIRBAG SENSOR ASSEMBLY (for Hatchback without VSC, for Hatchback with VSC/Separate Type Yaw Rate Sensor)









4. OCCUPANT CLASSIFICATION ECU





(a) Measure the voltage and check for pulse according to the value(s) in the table below.





* If the result is not as specified, the occupant classification ECU may have a malfunction.