Reassembly (from 07/2011)

1NZ-FE FUEL: FUEL PUMP (for Hatchback): REASSEMBLY

1. INSTALL FUEL PUMP

(a) Apply gasoline to a new O-ring, and then install the fuel pump spacer and new O-ring onto the fuel pump.





Text in Illustration





NOTICE:
* Do not disassemble the fuel pump and the suction filter because they are nonreusable parts.

HINT
Perform "Inspection After Repairs" after replacing the fuel pump Programming and Relearning.

(b) Connect the fuel pump harness.





(c) Engage the 5 claws of the suction filter with fuel pump.





Text in Illustration





NOTICE:
* Do not remove the suction filter from the fuel pump.
* Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.

(d) Engage the 2 claws of the fuel suction support.





(e) Engage the 2 claws of the fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.





(f) Connect the fuel tube.





(g) Connect the connector of the fuel pump harness.





2. INSTALL FUEL SENDER GAUGE ASSEMBLY Installation (from 07/2011)