Installation (from 07/2011)

1NZ-FE ENGINE CONTROL: ACCELERATOR PEDAL (for Hatchback): INSTALLATION

1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

(a) Install the accelerator pedal sensor assembly with the 2 bolts.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

NOTICE:
* Do not disassemble the accelerator pedal.
* If a component has been dropped or subjected to a strong impact, replace it.

(b) Connect the connector of the accelerator pedal sensor assembly.