Installation (from 07/2011)

LIGHTING (EXT): STOP LIGHT SWITCH (for Hatchback): INSTALLATION

1. INSTALL STOP LIGHT SWITCH ASSEMBLY

(a) Insert the stop light switch assembly until the rod hits the pedal.





HINT
When inserting the stop light switch assembly, support the pedal from behind so that the pedal is not pushed in.

(b) Make a quarter turn clockwise to install the stop light switch assembly.





HINT
When inserting the stop light switch assembly, support the pedal from behind so that the pedal is not pushed in.

Torque : 1.5 Nm (15 kgf-cm, 13 in-lbf) or less

(c) Check the protrusion of the rod.

Protrusion of the rod:

0.5 to 2.6 mm (0.020 to 0.102 in.)

(d) Connect the connector.

2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation (from 07/2011)