Installation (from 07/2011)

C50 MANUAL TRANSMISSION / TRANSAXLE: BACK-UP LIGHT SWITCH (for Hatchback): INSTALLATION

1. INSTALL BACK UP LIGHT SWITCH ASSEMBLY

(a) Using SST, install the back up light switch assembly to manual transaxle with new gasket.

SST : 09817-16011

Torque : 40 Nm (410 kgf-cm, 30 ft-lbf)

(b) Connect the back up light switch connector.

(c) Install the 2 clamps and wire harness.

2. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY





(a) Install the control shift cable of transmission control cable assembly to the shift cable bracket with new clip B.

(b) Install the control shift cable of transmission control cable assembly to the manual transaxle assembly with washer and clip A.

3. INSTALL AIR CLEANER CAP W/ AIR CLEANER HOSE Installation (from 07/2011)