Installation (from 07/2011)
INTERIOR PANELS / TRIM: LOWER INSTRUMENT PANEL (for Hatchback): INSTALLATION
1. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
(a) Using a nipper, cut off both ends of the runner portion shown in the illustration (When installing a new one).
Text in Illustration
(b) Engage the 10 guides and install the lower instrument panel.
(c) Install the lower instrument panel with the 6 or
(d) Connect the clamps and connectors.
(e) Engage the 2 claws and install the DLC3 connector.
2. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
(a) Engage the 3 claws and install the hood lock control lever.
3. INSTALL REAR CONSOLE BOX ASSEMBLY
Installation (from 07/2011)
4. CONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY Installation (from 07/2011)
5. CONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY Installation (from 07/2011)
6. INSTALL AIR CONDITIONING PANEL ASSEMBLY Installation (from 07/2011)
7. INSTALL STEREO OPENING COVER WITH BRACKET
(a) Align the 2 holes in the radio bracket with the 2 bosses of the instrument panel.
(b) Install the radio stereo opening cover with bracket with the 4 screws.
8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag)
(a) Engage the 5 claws and 2 clips and install the instrument panel finish panel.
9. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag) Installation (from 07/2011)
10. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
(a) Engage the 2 claws and 5 clips and install the instrument panel finish panel.
11. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
(a) Engage the guide and the claw.
(b) Install the instrument panel under cover with the 2 screws.
12. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
(a) Engage the guide and the 3 claws and install the instrument panel under cover.
13. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
(a) Engage the 3 guides and 2 hinges in the horizontal direction to install the glove compartment door.
Text in Illustration
NOTICE:
Engage the 2 hinges in the horizontal direction, otherwise, installation failure caused by excessive play around the hinges will result.
(b) While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.
(c) Engage the claw and connect the glove compartment door stopper.
14. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY
Installation (from 07/2011)