Pinout Values and Diagnostic Parameters

DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM (for Hatchback): TERMINALS OF ECU

1. CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU

Text in Illustration

(a) Remove the main body ECU from the instrument panel junction block assembly.

(b) Measure the resistance and voltage between each terminal of the wire harness side connectors and body ground.

(c) Install the main body ECU to the instrument panel junction block assembly.

(d) Measure the voltage and resistance, check for pulse according to the value(s) in the table below.

* *1: for 5 Door

* *2: w/o Daytime Running Light System and w/o Theft Deterrent System

* *3: w/ Daytime Running Light System or w/ Theft Deterrent System

* *4: w/ Theft Deterrent System