Pinout Values and Diagnostic Parameters

DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM (for Hatchback): TERMINALS OF ECU

1. CHECK MAIN BODY ECU AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

Text in Illustration

(a) Remove the main body ECU from the instrument panel junction block assembly.

(b) Measure the resistance and voltage between each terminal of the wire harness side connectors and body ground.

(c) Install the main body ECU to the instrument panel junction block assembly.

(d) Measure the voltage and resistance, check for pulse according to the value(s) in the table below.

* *1: for 5 Door

* *2: w/o Daytime Running Light System and w/o Theft Deterrent System

* *3: w/ Daytime Running Light System or w/ Theft Deterrent System

* *4: w/ Theft Deterrent System