Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Removal





POWER OUTLETS (INT): REAR POWER OUTLET SOCKET: REMOVAL

1. REMOVE REAR DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and the LH side Removal.

2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT
Use the same procedure for the RH side and the LH side Removal.

3. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) Removal

4. REMOVE DECK BOARD ASSEMBLY Removal

5. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY Removal

6. REMOVE DECK SIDE TRIM BOX LH Removal

7. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY Removal

8. REMOVE DECK SIDE TRIM BOX RH Removal

9. REMOVE NO. 1 DECK BOARD Removal

10. REMOVE REAR SEAT SUB FLOOR PANEL ASSEMBLY Removal

11. REMOVE REAR FLOOR FINISH PLATE Removal

12. REMOVE REAR SEAT HEADREST ASSEMBLY Removal

13. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY Removal

14. REMOVE REAR SEAT INNER TRACK BRACKET COVER Removal

15. REMOVE REAR SEAT OUTER TRACK BRACKET COVER Removal

16. DISCONNECT REAR SEAT RECLINING CONTROL CABLE Removal

17. REMOVE REAR SEAT ASSEMBLY RH Removal

18. REMOVE RECLINING REMOTE CONTROL BEZEL RH

HINT
Use the same procedure for the RH side and the LH side Removal.

19. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

HINT
Use the same procedure for the RH side and the LH side Removal.

20. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY RH

HINT
Use the same procedure for the RH side and the LH side Removal.

21. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH Removal

22. REMOVE REAR POWER POINT SOCKET ASSEMBLY

(a) Using a screwdriver, disengage the 2 claws and remove the rear power point socket assembly as shown in the illustration.





Text in Illustration





HINT
Tape the screwdriver tip before use.

23. REMOVE REAR POWER POINT SOCKET COVER

(a) Disengage the 2 claws and remove the rear power point socket cover.





24. REMOVE SIDE TRIM COVER RH (w/ Voltage Inverter) Removal

25. REMOVE POWER OUTLET SOCKET ASSEMBLY (w/ Voltage Inverter)

(a) Disengage the 2 claws and remove the power outlet socket assembly.