Removal

PARKING BRAKE: PARKING BRAKE SWITCH: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT SEAT ASSEMBLY LH

HINT
Refer to the instructions for Removal of the front seat assembly.

* for Manual Seat: Removal
* for Power Seat: Removal

3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System) Removal

4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Seat Heater System) Removal

5. REMOVE NO. 2 CONSOLE BOX CARPET Removal

6. REMOVE CONSOLE BOX ASSEMBLY Removal

7. REMOVE AIR CONDITIONING CONTROL ASSEMBLY Removal

8. REMOVE FRONT DOOR SCUFF PLATE LH Removal

9. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal

10. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Removal

11. REMOVE FRONT DOOR SCUFF PLATE RH Removal

12. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal

13. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

14. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Removal

15. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

16. REMOVE POSITION INDICATOR HOUSING ASSEMBLY Removal

17. REMOVE CONSOLE BOX SUB-ASSEMBLY Removal

18. SEPARATE PARKING BRAKE PEDAL ASSEMBLY

(a) Turn back the floor carpet.

(b) Disconnect the heated oxygen sensor connector and disengage the 2 clamps (for 2GR-FE).

(d) Disconnect the parking brake switch connector.

(e) Remove the 3 nuts and separate the parking brake pedal assembly from the body.

19. REMOVE PARKING BRAKE SWITCH ASSEMBLY

(a) Remove the screw and parking brake switch assembly.