Installation

LIGHTING (EXT): HEADLIGHT ASSEMBLY: INSTALLATION

1. INSTALL HEADLIGHT ASSEMBLY

(a) Connect each connector.

(b) Install the headlight assembly with the bolt and 3 screws.





Torque : 3.6 Nm (37 kgf-cm, 32 in-lbf)

2. INSTALL FRONT BUMPER ASSEMBLY Installation

3. INSTALL RADIATOR GRILLE Installation

4. INSTALL COOL AIR INTAKE DUCT SEAL Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. PREPARE VEHICLE FOR HEADLIGHT AIM ADJUSTMENT Adjustments

7. PREPARE FOR HEADLIGHT AIMING (Using a headlight aim test machine) Adjustments

8. PREPARE FOR HEADLIGHT AIMING (Using a screen) Adjustments

9. INSPECT HEADLIGHT AIMING Adjustments

10. ADJUST HEADLIGHT AIMING Adjustments

11. PREPARE VEHICLE FOR FOG LIGHT AIMING (w/ Fog Light) Adjustments

12. PREPARE FOR FOG LIGHT AIMING (w/ Fog Light) Adjustments

13. INSPECT FOG LIGHT AIMING (w/ Fog Light) Adjustments

14. ADJUST FOG LIGHT AIMING (w/ Fog Light) Adjustments