Removal

1AR-FE ENGINE MECHANICAL: ENGINE UNIT: REMOVAL

1. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

(a) Remove the engine oil level dipstick.





(b) Remove the bolt and engine oil level dipstick guide.

(c) Remove the O-ring from the engine oil level dipstick guide.

2. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR Removal

3. REMOVE MANIFOLD STAY Removal

4. REMOVE NO. 2 MANIFOLD STAY Removal

5. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY Removal

6. REMOVE NO. 1 COMPRESSOR MOUNTING BRACKET

(a) Remove the 4 bolts and bracket.





7. REMOVE THROTTLE BODY ASSEMBLY Removal

8. REMOVE WATER BY-PASS HOSE

(a) Remove the No. 1 and No. 2 water by-pass hoses.





9. DISCONNECT NO. 2 VENTILATION HOSE Removal

10. REMOVE INTAKE MANIFOLD Removal

11. REMOVE SENSOR WIRE

(a) Disconnect the knock control sensor connector.





(b) Remove the bolt and sensor wire.

12. REMOVE KNOCK CONTROL SENSOR Removal

13. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY Removal

14. REMOVE ENGINE COOLANT TEMPERATURE SENSOR Removal

15. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY Removal

16. REMOVE IGNITION COIL ASSEMBLY Removal