Installation

THEFT DETERRENT / KEYLESS ENTRY: CERTIFICATION ECU: INSTALLATION

1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)

(a) Install the certification ECU (smart key ECU assembly) with the 2 nuts.





(b) Connect each connector.





2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation

3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY

HINT
Use the same procedure for the RH side and LH side Installation.

5. INSTALL FRONT DOOR SCUFF PLATE

HINT
Use the same procedure for the RH side and LH side Installation.

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. REGISTER KEY

NOTICE:
When replacing the certification ECU (smart key ECU assembly), perform initialization Engine Immobilizer System (w/ Smart Key System).

8. REGISTER ECU COMMUNICATION ID

NOTICE:
When replacing the certification ECU (smart key ECU assembly), perform initialization Engine Immobilizer System (w/ Smart Key System).