Installation

WIPER / WASHER: RELAY (w/ Headlight Cleaner System): INSTALLATION

1. INSTALL HEADLIGHT CLEANER CONTROL RELAY

(a) Engage the claw to install the headlight cleaner control relay as shown in the illustration.





(b) Install the washer jar assembly with the bolt.





Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(c) Engage the clamp.

(d) Connect the 2 connectors.

(e) Connect the 2 washer hoses.





(f) Engage the hose clamp.

(g) Install the 2 bolts.





Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(h) Engage the clamp.

(i) Connect the 2 connectors.

(j) Connect the washer jar cap to the washer jar assembly.





(k) Engage the clip.

2. INSTALL INLET AIR CLEANER ASSEMBLY Installation

3. INSTALL FRONT BUMPER ASSEMBLY Installation

4. INSTALL RADIATOR SUPPORT OPENING COVER Installation

5. ADD WASHER FLUID Installation

6. PREPARE VEHICLE FOR FOG LIGHT AIM ADJUSTMENT (w/ Fog Light) Adjustments

7. PREPARE FOR FOG LIGHT AIMING (w/ Fog Light) Adjustments

8. INSPECT FOG LIGHT AIMING (w/ Fog Light) Adjustments

9. ADJUST FOG LIGHT AIMING (w/ Fog Light) Adjustments