Repair Instruction - Customize Parameters

INTRODUCTION: REPAIR INSTRUCTION: CUSTOMIZE PARAMETERS

NOTICE:
* When the customer requests a change in a function, first make sure that the function can be customized.
* Be sure to make a note of the current settings before customizing.
* When troubleshooting a function, first make sure that the function is set to the default setting.

HINT
The following items can be customized.

1. POWER DOOR LOCK CONTROL SYSTEM

(a) Customizing with the Techstream

Door Lock

* *1: for Korea

* *2: except Korea

Illuminated Entry

(b) Customizing with the Multi-display (w/ Navigation System (for Navigation Receiver Type) or w/ Audio and Visual System (w/o Daytime Running Light))

(1) Turn the power switch on (IG).

(2) Enter the following menus: SETUP / Vehicle / Vehicle Settings / Door Lock Settings.

(3) Select the setting by referring to the table below.

* *1: for Korea

* *2: except Korea

(c) Customizing with the Multi-display (w/ Navigation System (for Radio and Display Type) or w/ Audio and Visual System (w/ Daytime Running Light))

(1) Turn the power switch on (IG).

(2) Enter the following menus: SETUP / Vehicle / Vehicle Customization / Door Lock Settings.

(3) Select the setting by referring to the table below.

2. WIRELESS DOOR LOCK CONTROL SYSTEM

(a) Customizing with the Techstream

Wireless Door Lock Control System

* *1: except for Korea

* *2: for Korea

Illuminated Entry

(b) Customizing with the Multi-display (w/ Navigation System (for Navigation Receiver Type) or w/ Audio and Visual System (w/o Daytime Running Light))

(1) Turn the power switch on (IG).

(2) Enter the following menus: SETUP / Vehicle / Vehicle Customization / Door Lock Settings.

(3) Select the setting by referring to the table below.

* *1: except Korea

* *2: for Korea

(c) Customizing with the Multi-display (w/ Navigation System (for Radio and Display Type) or w/ Audio and Visual System (w/ Daytime Running Light))

(1) Turn the power switch on (IG).

(2) Enter the following menus: SETUP / Vehicle / Vehicle Settings.

(3) Select the setting by referring to the table below.

3. SMART KEY SYSTEM (for Entry Function)

(a) Customizing with the Techstream

Smart Key / Access

* *1: Weak radio waves will still be emitted from oscillators other than the front oscillator even when the "Front" customize setting is selected.

* *2: w/ Entry System Back Door Open Function

* *3: except for Korea and Mexico

Warning

(b) Customizing with the multi-display (w/ Navigation System (for Navigation Receiver Type) or w/ Audio and Visual System (w/o Daytime Running Light))

(1) Turn the power switch on (IG).

(2) Enter the following menus: SETUP / Vehicle / Vehicle Customization / Door Lock Setting.

(3) Select the setting by referring to the table below.

* *1: except Korea

* *2: for Korea

(c) Customizing with the multi-display (w/ Navigation System (for Radio and Display Type) or w/ Audio and Visual System (w/ Daytime Running Light))

(1) Turn the power switch on (IG).

(2) Enter the following menus: SETUP / Vehicle.

(3) Select the setting by referring to the table below.

* *1: except Korea

* *2: for Korea

4. ENTRY UNLOCK MODE SWITCHING* (SMART KEY SYSTEM (for Entry Function))

*: except for Korea and Mexico

(a) Check that the power source mode is OFF and the LED on the key is not blinking. Press the LOCK button and one of the other buttons on the key at the same time for approximately 5 seconds while the key is in the actuation area.

Driver door unlock default setting:

When the switches are pressed and held for 5 seconds, the entry door unlock mode changes to the mode that is not currently selected.

NOTICE:
After pressing and holding the switches for 5 seconds, wait 5 seconds before performing the same procedure again.

* Driver door unlock mode:

When the driver door touch sensor is touched, only the driver door unlocks. When another touch sensor is touched, all doors unlock.*

*: w/ Entry System Back Door Open Function

* All door unlock mode:

When any touch sensor is touched, all doors unlock.

(b) The certification ECU (smart key ECU assembly) receives this signal from the door control receiver assembly and changes the smart key system to entry unlock mode.

(c) The certification ECU (smart key ECU assembly) sounds the buzzers of the wireless door lock buzzer assembly.

HINT
The procedure only changes entry unlock mode of the smart key system. It does not switch the unlocking of the wireless door lock control.

5. ELECTRICAL KEY CANCEL (SMART KEY SYSTEM (for Entry Function))

The electrical key cancel operation disables the following functions:

* Entry Unlock/Lock

* Entry Hybrid Vehicle Control System Start

* Entry System Back Door Open Function*

*: w/ Entry System Back Door Open Function

* Electrical Key Lock-in Prevention

* Warning

(a) The operation procedure is as follows:

Precondition:

Power switch off, driver door closed and unlocked.

(1) Push the unlock switch of the key once.

(2) Open the driver door within 5 seconds.

(3) Push the unlock switch of the key twice within 5 seconds.

(4) Close and open the driver door twice within 30 seconds.

(Driver door: Close -> Open -> Close -> Open)

(5) Push the unlock switch of the key twice within 5 seconds.

(6) Close and open the driver door within 30 seconds.

(Driver door: Close -> Open)

(7) Close the driver door within 5 seconds.

When electrical key cancel is activated, the wireless door lock buzzer sounds twice.

To return to the original condition, perform the procedure again. When the original condition is returned, the wireless door lock buzzer sounds once.

6. SMART KEY SYSTEM (for Start Function)

(a) Customizing with the Techstream

Smart Key / Access

* *: Weak radio waves will still be emitted from oscillators other than the front oscillator even when the "Front" customize setting is selected.

(b) Customizing with the multi-display (w/ Navigation System (for Navigation Receiver Type) or w/ Audio and Visual System (w/o Daytime Running Light))

(1) Turn the power switch on (IG).

(2) Enter the following menus: SETUP / Vehicle / Vehicle Customization / Door Lock Setting.

(3) Select the setting by referring to the table below.

* *1: except Korea

* *2: for Korea

7. CUSTOMIZING FUNCTION WITHOUT TECHSTREAM (SMART KEY SYSTEM (for Start Function))

Performing the following procedure disables the smart key system.

HINT
To start the hybrid control system while the smart key system is disabled, follow the procedure for when the key battery is low System Description.

(a) The operation procedure is as follows:

Precondition:

Power switch off, driver door closed and unlocked.

(1) Push the unlock switch of the key once.

(2) Open the driver door within 5 seconds.

(3) Push the unlock switch of the key twice within 5 seconds.

(4) Close and open the driver door twice within 30 seconds.

(Driver door: Close -> Open -> Close -> Open)

(5) Push the unlock switch of the key twice within 5 seconds.

(6) Close and open the driver door within 30 seconds.

(Driver door: Close -> Open)

(7) Close the driver door within 5 seconds.

When electrical key cancel is activated, the wireless door lock buzzer sounds twice.

To return to the original condition, perform the procedure again. When the original condition is returned, the wireless door lock buzzer sounds once.

8. LIGHTING SYSTEM (LIGHTING INT)

(a) Customizing with the Techstream

Illuminated Entry

(b) Customizing with the multi-display (w/ Navigation System (for Navigation Receiver Type) or w/ Audio and Visual System (w/o Daytime Running Light))

(1) Turn the power switch on (IG).

(2) Enter the following menus: Setup / Vehicle / Vehicle Customization / Light Settings.

(3) Select the setting by referring to the table below.

Light Settings

9. METER / GAUGE SYSTEM

Warning

* *1: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more.

* *2: w/ Rear Seat Belt Warning

10. SEAT BELT WARNING SYSTEM

Combination Meter

HINT
This setting is only valid when the vehicle is driven at 20 km/h (12 mph) or more.

11. AIR CONDITIONING SYSTEM

(a) Customizing with the Techstream

Air Conditioner

* *1: w/ Remote Air Conditioning System

* *2: for Korea and Mexico

* *3: except Korea and Mexico

(b) Customizing with the multi-display (w/ Navigation System (for Navigation Receiver Type)

(1) Turn the power switch on (IG).

(2) Enter the following menus: SETUP / Vehicle / Vehicle Settings / Climate Settings.

(3) Select the setting by referring to the table below.

* *1: for Korea

* *2: except Korea

12. POWER WINDOW CONTROL SYSTEM

Power Window

13. LIGHTING SYSTEM (LIGHTING EXT)

(a) Customizing with the Techstream

Light Control

* *1: w/o DRL

* *2: Headlight dimmer switch with DRL OFF

HINT
The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

*A

(b) Customizing with the multi-display (w/ Navigation System (for Navigation Receiver Type) or w/ Audio and Visual System (w/o Daytime Running Light))

(1) Turn the power switch on (IG).

(2) Enter the following menus: SETUP / Vehicle / Vehicle Customization / Light Settings.

(3) Select the setting by referring to the table below.

Light Settings

* *1: Headlight dimmer switch with DRL OFF function.

HINT
The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

*A

(c) Customizing with the multi-display (w/ Navigation System (for Radio and Display Type) or w/ Audio and Visual System (w/ Daytime Running Light))

(1) Turn the power switch on (IG).

(2) Enter the following menus: SETUP / Vehicle.

(3) Select the setting by referring to the table below.

Vehicle Settings

* *1: Headlight dimmer switch with DRL OFF function.

HINT
The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

*A