Removal

LIGHTING (EXT): HEIGHT CONTROL SENSOR: REMOVAL

1. REMOVE REAR NO. 2 FLOOR BOARD (for Separate Type) Removal

2. REMOVE REAR DECK FLOOR BOX Removal

3. REMOVE REAR NO. 3 FLOOR BOARD Removal

4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. REMOVE REAR WHEEL

6. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

(a) Disconnect the connector.





(b) Remove the 3 bolts.

(c) Disengage the guide and remove the rear height control sensor sub-assembly.

NOTICE:
Do not drop the rear height control sensor sub-assembly. If it is dropped, replace it with a new one.