Brake Light Switch: Testing and Inspection

LIGHTING (EXT): STOP LIGHT SWITCH: ON-VEHICLE INSPECTION

1. INSPECT STOP LIGHT SWITCH ASSEMBLY

(a) Disconnect the A67 connector from the stop light switch assembly.





(b) Measure the voltage and resistance according to the value(s) in the table below.

Standard Voltage:





Standard Resistance:





Text in Illustration





If the result is not as specified, repair or replace the wire harness or connector.

(c) Reconnect the A67 connector to the stop light switch assembly.





(d) Measure the voltage according to the value(s) in the table below.

Standard Voltage:





Text in Illustration





If the result is not as specified, replace the stop light switch assembly.