Navigation - Entune(R) Apps And Data Svcs. Initialization

T-SB-0060-12

April 2, 2012

Entune(TM) Apps and Data Services Initialization Process

Service Category
Audio/Visual/Telematics

Section
Navigation/Multi Info Display

Market
USA





Applicability

Introduction

An Initialization Process is required to activate the Entune(TM) suite of Apps & Data Services on Premium HDD Navigation with Entune(TM) and Display Navigation with Entune(TM) head units before they are used for the first time on new vehicles. The Initialization Process may also need to be performed under other circumstances such as following a head unit replacement or after the customer's personal settings are erased. The Initialization process requires between 3 and 15 minutes to complete, depending on the type of head unit, file size, cellular connection speed and and other factors. Following the Initialization process, individual Entune(TM) Apps may also be periodically updated via an over the air update system. Updates can come in "Optional" or "Mandatory" form. The update process will take approximately 1 minute for each application requiring an update. Follow the procedure below to perform the initialization process or app updates when necessary.





Warranty Information

Repair Procedure

Note:

An Entune(TM) compatible phone and an active Entune(TM) account are necessary to perform initialization or updates.

1. Refer to the "Toyota Bluetooth(R) Compatibility Information" link on the Technical Information System (Diagnostics > Telematics), to verify phone compatibility.

2. Connect the phone to the vehicle via Bluetooth(R). Follow the steps outlined in the "Quick Pairing" instructions on TIS.

3. Open the Entune(TM) App on the phone.

4. On Premium HDD Navigation with Entune(TM) press the "INFO" button. On Display Navigation with Entune(TM), press the "MENU" button.





5. Select "Apps".





6. A screen indicating "Checking for updates" will be displayed.





7. The screen will indicate if the App update is required or optional. Press the "OK' button to proceed with the update. If NO update is required the Apps Suite screen will appear (Figure 7).





8. A screen will appear indicating the update is in process.





9. Select "OK" once the Apps update is complete.





10. The update is now complete.