Power Distribution

POWER DISTRIBUTION: INTEGRATION RELAY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE NO. 1 RELAY BLOCK COVER

(a) Disengage the 3 claws and remove the No. 1 relay block cover.





3. REMOVE NO. 1 INTEGRATION RELAY

(a) Disengage the 2 claws and pull up the No. 1 integration relay as shown in the illustration.





(b) Disconnect the 3 connectors and remove the No. 1 integration relay.