Maintenance Indicator Reset

Reset the Maintenance Data (U.S.A. only)
After the required maintenance is performed according to the maintenance schedule, please reset the maintenance data.
To reset the data, follow the procedures described below:

1. Turn the POWER switch to OFF mode with the trip meter "A" shown.

2. Turn the POWER switch to ON mode with the MPH or km/h button held down.

3. Keep pressing the button until the odometer indicates "000000" and the multi-information display indicates that the reset is complete.

Navigation Maintenance Item Setting (If equipped)
When the navigation system is turned on, the "Information" screen displays when it is time to replace a part or certain components.





1. Press the "SETUP" button.





2. Touch "Vehicle" on the setup screen.





3. Touch "Maintenance" on the vehicle settings screen.





4. Touch the desired screen button.
- When the vehicle needs to be service, the screen button co.or will change to orange.









5. Input the conditions.
6. Touch "OK"
- The screen returns to the "Maintenance" screen.

Information:
- For scheduled maintenance information, please refer to the Scheduled maintenance guide or Owners manual supplement.
- Depending on driving or road conditions, the actual date and distance maintenance should be performed may differ from the stored date and distance in the system.