Reassembly

LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: REASSEMBLY

1. INSTALL REAR COMBINATION LIGHT CLIP

(a) Install 2 new rear combination light clips.





2. INSTALL REAR COMBINATION LIGHT GASKET

(a) Install a new rear combination light gasket.





3. INSTALL REAR BUMPER UPPER RETAINER

(a) Engage the claw and install the rear bumper upper retainer.





4. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

(a) Connect the connector.





(b) Engage the 2 clamps to install the rear combination light socket and wire sub-assembly.

5. INSTALL BACK-UP LIGHT BULB

(a) Install the back-up light bulb to the rear combination light socket and wire sub-assembly.

(b) Turn the rear combination light socket and wire sub-assembly with the back-up light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.





6. INSTALL REAR TURN SIGNAL LIGHT BULB

(a) Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.

(b) Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.





7. INSTALL REAR COMBINATION LIGHT BODY GASKET

(a) Install a new rear combination light body gasket.