Operation Check

LIGHTING (EXT): LIGHTING SYSTEM: OPERATION CHECK

1. AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK

(a) Turn the power switch on (IG).

(b) Turn the light control switch to the AUTO position.

(c) Cover the automatic light control sensor.

(d) Check that the taillights and low beam headlights come on.

(e) Uncover the automatic light control sensor.

(f) Check that the low beam headlights and taillights go off.

2. LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK

(a) When only the taillights are on.

(1) Close the driver door.

(2) Turn the power switch on (IG).

(3) Turn the light control switch to the tail position.

(4) Turn the power switch off.

(5) Open the driver door.

(6) Check that the taillights go off immediately.

(b) When the low beam headlights are on.

(1) Close all of the doors.

(2) Turn the power switch on (IG).

(3) Turn the low beam headlights, high beam headlights or front fog lights on.

(4) Turn the power switch off.

(5) Open any door.

(6) Close all of the doors.

(7) Check that all of the lights go off after 30 seconds (delay function).

HINT
Before the lights go off, if the lock button on the key is pushed after all of the doors are locked, all of the lights will go off immediately. But the lights will not go off immediately when the remote A/C switch on the key is pressed to lock all of the doors.

3. DAYTIME RUNNING LIGHT SYSTEM OPERATION CHECK

(a) Turn the light control switch to the tail position.

(b) Turn the power switch on (READY).

(c) Release the parking brake.

(d) Check that the daytime running lights come on.