System Description
METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: SYSTEM DESCRIPTION
1. OUTLINE OF COMBINATION METER ASSEMBLY
2. INPUT AND OUTPUT SIGNALS OF COMBINATION METER ASSEMBLY (NO. 3 METER CIRCUIT PLATE)
(a) Meter or Gauge
* *1: w/ Headup Display
(b) Warning or Indicator
* *1: w/ Lane-keeping Assist System
* *2: w/ Automatic Type Headlight Beam Level Control
* *3: for U.S.A.
* *4: except U.S.A.
* *5: w/ Dynamic Radar Cruise Control System
* *6: w/ Pre-collision System
* *7: w/ Tire Pressure Warning System
(c) Cruise Information Display
(d) Multi-information Display Message
* *1: w/ Lane-keeping Assist System
* *2: w/ Dynamic Radar Cruise Control System
* *3: w/ Pre-collision System
* *4: for U.S.A.
(e) Buzzer
* *1: w/ Sliding Roof
* *2: w/ Dynamic Radar Cruise Control System
(f) Others
* *1: for Navigation Receiver Type or for Radio and Display Type (w/o Daytime Running Light)
* *2: for Radio and Display Type (w/ Daytime Running Light)
* *3: for 8 Speakers
* *4: w/ Tire Pressure Warning System
* *5: for Automatic Type Headlight Beam Level Control
* *6: w/ Manual (SOS) Switch
* *7: w/ Vehicle Proximity Notification System
3. MULTI-INFORMATION DISPLAY FLOW CHART
(a) Multi-information display flow chart
Display Shifting Condition:
4. HEADUP DISPLAY (COMBINATION METER MIRROR ECU) (w/ Headup Display)
* *1: w/ Dynamic Radar Cruise Control System
* *2: w/ Pre-collision System
5. EACH WARNING DISPLAY
(a) Each warning display for combination meter assembly
HINT
Illustrations may differ from the actual screen displayed depending on the specifications of the vehicle.
(b) Each display for headup display (combination meter mirror ECU)
HINT
Illustrations may differ from the actual screen displayed depending on the specifications of the vehicle.
6. LED INITIAL CHECK
(a) Check the illumination function of the warning or indicator lights listed below when turning the power switch on (IG).
OK:
* *1: w/ Pre-collision System
* *2: w/ Tire Pressure Warning System
* *3: When turning the power switch on (IG), if it takes 3 seconds or more for the READY indicator light to illuminate, the warning or indicator light turns off right after the READY indicator light illuminates.