Reassembly

INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REASSEMBLY

1. INSTALL CENTER POWER OUTLET SOCKET COVER Installation

2. INSTALL CENTER POWER OUTLET SOCKET ASSEMBLY Installation

3. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY Installation

4. INSTALL FRONT CONSOLE BOX FILLER SUB-ASSEMBLY Installation

5. INSTALL NO. 2 BOX SIDE PANEL

(a) Engage the 8 claws and guide to install the No. 2 box side panel as shown in the illustration.





6. INSTALL NO. 1 BOX SIDE PANEL

HINT
Use the same procedure as for the No. 2 box side panel.

7. INSTALL NO. 2 CONSOLE COMPARTMENT DOOR INSERT

(a) Engage the 2 claws and 3 guides to install the No. 2 console compartment door insert as shown in the illustration.





8. INSTALL NO. 1 CONSOLE COMPARTMENT DOOR INSERT

HINT
Use the same procedure as for the No. 2 console compartment door insert.

9. INSTALL REAR CONSOLE COMPARTMENT DOOR BOX COVER

(a) Engage the claw and 5 guides to install the rear console compartment door box cover as shown in the illustration.





10. INSTALL CONSOLE COMPARTMENT DOOR PAD SUB-ASSEMBLY

(a) Engage the 8 claws to install the console compartment door pad sub-assembly.





11. INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY

(a) Temporarily install the console compartment door sub-assembly.

(b) Push in the box door hinge shafts by hand as far as possible.





HINT
* The illustration is for the LH side.
* Use the same procedure for the RH side and LH side.

(c) Using pliers, push in the box door hinge shafts completely and install the console compartment door sub-assembly.





HINT
* The illustration is for the LH side.
* Use the same procedure for the RH side and LH side.

12. INSTALL CONSOLE REAR END PANEL

(a) Engage the 10 claws to install the console rear end panel.