Removal
DOOR / HATCH: FUEL LID LOCK CONTROL CABLE ASSEMBLY: REMOVAL
1. REMOVE REAR NO. 2 FLOOR BOARD (for Separate Type) Removal
2. REMOVE REAR DECK FLOOR BOX Removal
3. REMOVE REAR NO. 3 FLOOR BOARD Removal
4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
5. REMOVE FRONT SEAT ASSEMBLY LH
HINT
Refer to the procedure up to Remove Front Seat Assembly LH Removal.
6. REMOVE FRONT DOOR SCUFF PLATE LH Removal
7. REMOVE REAR DOOR SCUFF PLATE LH Removal
8. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH Removal
9. REMOVE LAP BELT OUTER ANCHOR COVER LH Removal
10. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH Removal
11. REMOVE CENTER PILLAR LOWER GARNISH LH Removal
12. REMOVE REAR SEAT CUSHION ASSEMBLY Removal
13. REMOVE REAR SIDE SEATBACK ASSEMBLY LH Removal
14. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) Removal
15. REMOVE REAR NO. 4 FLOOR BOARD Removal
16. REMOVE DECK FLOOR BOX LH Removal
17. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY Removal
18. REMOVE REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY Removal
19. REMOVE REAR NO. 1 FLOOR BOARD Removal
20. REMOVE DECK TRIM SERVICE HOLE COVER Removal
21. REMOVE REAR DECK TRIM COVER Removal
22. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY Removal
23. REMOVE TONNEAU COVER HOLDER CAP Removal
24. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH Removal
25. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY
(a) Remove the screw.
(b) Disengage the guide and disconnect the fuel lid lock open lever sub-assembly as shown in the illustration.
(c) Disconnect the fuel lid lock control cable sub-assembly.
26. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY
(a) Disengage the 2 claws and disconnect the fuel lid lock control cable sub-assembly.
(b) Disengage the 7 clamps and remove the fuel lid lock control cable sub-assembly.
