P3004-133

HYBRID / BATTERY CONTROL: HYBRID CONTROL SYSTEM: P3004-133: High Voltage Power Resource
P3004-133 - High Voltage Power Resource

DESCRIPTION

The power management control ECU monitors its internal operation, it will set DTCs and perform fail-safe control when it detects the following malfunctions.





INSPECTION PROCEDURE

PROCEDURE

1. CHECK DTC OUTPUT (HV)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

(d) Check if DTCs are output.

Result:





(e) Turn the power switch off.

B -- GO TO DTC CHART Hybrid Control System

A -- REPLACE POWER MANAGEMENT CONTROL ECU