Installation

P314 HYBRID TRANSMISSION / TRANSAXLE: GENERATOR CABLE: INSTALLATION

1. INSTALL GENERATOR CABLE

(a) Install the generator cable to the hybrid vehicle transaxle assembly with 4 new bolts.

Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)

2. INSTALL INVERTER TRAY BRACKET SUB-ASSEMBLY

(a) Temporarily install the inverter tray bracket sub-assembly to the body with the 4 bolts.





HINT
Temporarily tighten bolt 1.

(b) Install the 4 bolts in the order shown in the illustration.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

3. INSTALL INVERTER WITH CONVERTER ASSEMBLY

Installation