Installation

WIPER / WASHER: WIPER SWITCH: INSTALLATION

1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

(a) Engage the claw to install the windshield wiper switch assembly as shown in the illustration.





(b) Connect the 2 connectors.

2. INSTALL UPPER STEERING COLUMN COVER

NOTICE:
If the lower steering column cover is installed in the incorrect order, it will not be possible to assemble the steering column cover.

(a) Engage the 2 claws to install the upper steering column cover.

(b) Engage the 4 clips and 2 guides to install the instrument cluster finish panel to the upper steering column cover.

3. INSTALL LOWER STEERING COLUMN COVER

(a) Engage the 2 claws.





(b) Engage the 2 claws.





HINT
Press the area around the claws to engage them.

(c) Turn the steering wheel assembly to the left to install the screw.

Torque : 2.0 Nm (20 kgf-cm, 18 in-lbf)

(d) Turn the steering wheel assembly to the right to install the lower steering column cover with screw.

Torque : 2.0 Nm (20 kgf-cm, 18 in-lbf)

NOTICE:
* Confirm that the steering column cover does not touch the steering wheel.
* If there is interference, confirm that the steering column cover claws are correctly engaged.
* Replace the steering column cover if any claws have been damaged.