Combination Switch

HYBRID / BATTERY CONTROL: COMBINATION SWITCH: INSPECTION

1. INSPECT EV DRIVE MODE SWITCH (PATTERN SELECT SWITCH ASSEMBLY)

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





Text in Illustration





If the result is not as specified, replace the EV drive mode switch (pattern select switch assembly).

(b) Apply Auxiliary battery voltage between the terminals of the switch, and check the illumination condition of the pattern select switch assembly.





Standard Resistance:





Text in Illustration





If the result is not as specified, replace the EV drive mode switch (pattern select switch assembly).