Removal

2AR-FXE STARTING: POWER SWITCH: REMOVAL

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Service Precautions.

2. REMOVE LUGGAGE TRIM SERVICE HOLE COVER Removal

3. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY

Removal

5. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY

Removal

6. REMOVE FRONT DOOR SCUFF PLATE LH Removal

7. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal

8. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH Removal

9. REMOVE INSTRUMENT SIDE PANEL LH Removal

10. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

11. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

12. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Removal

13. REMOVE FRONT PANEL GARNISH LH Removal

14. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Removal

15. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL ASSEMBLY Removal

16. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Removal

17. REMOVE POWER SWITCH

(a) Disengage the 2 claws and remove the power switch.