Removal

LIGHTING (EXT): HEIGHT CONTROL SENSOR: REMOVAL

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Service Precautions.

2. REMOVE LUGGAGE TRIM SERVICE HOLE COVER Removal

3. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

(a) Disconnect the connector.





(b) Remove the nut and 2 bolts.

(c) Disengage the clamp and remove the rear height control sensor sub-assembly.

NOTICE:
Do not drop the rear height control sensor sub-assembly. If it is dropped, replace it with a new one.