Traction Control Switch: Testing and Inspection

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VSC OFF SWITCH: INSPECTION

1. INSPECT VSC OFF SWITCH

(a) Make sure that there is no looseness in the locking part and the connecting part of the connector.





(b) Disconnect the VSC OFF switch connector.

(c) Check both the connector case and the terminal for deformation and corrosion.

OK:

No deformation or corrosion.

(d) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





If the result is not as specified, replace the VSC OFF switch.