Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VSC OFF SWITCH: REMOVAL

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notice before proceeding with work Service Precautions.

2. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

Removal

3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH Removal

4. REMOVE INSTRUMENT SIDE PANEL LH Removal

5. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

6. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

7. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Removal

8. REMOVE VSC OFF SWITCH

(a) Disengage the 2 claws and remove the VSC OFF switch from the instrument cluster finish panel assembly.