Brake Lamp Relay: Testing and Inspection

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: RELAY: ON-VEHICLE INSPECTION

1. INSPECT STOP LIGHT CONTROL RELAY (STOP RELAY)

(a) Remove the stop light control relay (STOP relay).





(b) Check both the relay case and the terminal for deformation and corrosion.

OK:

No deformation or corrosion.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





If the result is not as specified, replace the stop light control relay (STOP relay).