Transmission Position Sensor/Switch: Adjustments

P314 HYBRID TRANSMISSION / TRANSAXLE: SHIFT LEVER POSITION SENSOR: ADJUSTMENT

1. INSPECT SHIFT LEVER POSITION SENSOR POSITION

(a) Apply the parking brake.

(b) Lock the wheels with chocks to secure the vehicle.

(c) Turn the power switch on (READY).

(d) Move the shift lever to D and release the brake.

NOTICE:
Be sure to apply the parking brake and lock the wheels with chocks to secure the vehicle.

(e) Slowly move the shift lever to N and measure moving distance (A) of the shift lever from the original point to the gear activation point.





Text in Illustration





NOTICE:
Be sure to move the shift lever slowly.

(f) Move the shift lever to R and release the brake.

NOTICE:
Be sure to apply the parking brake and lock the wheels with chocks to secure the vehicle.

(g) Slowly move the shift lever to N and measure moving distance (B) of the shift lever from the original point to the vehicle activation point.

NOTICE:
Be sure to move the shift lever slowly.

(h) Check that moving distances (A) and (B) shown in the illustration are almost the same.

HINT
* If moving distances (A) and (B) are almost the same, adjustment of the shift lever position is not necessary.
* If moving distance (A) is shorter than (B), perform adjustment of the shift lever position [*1].
* If moving distance (B) is shorter than (A), perform adjustment of the shift lever position [*2].

2. ADJUST SHIFT LEVER POSITION SENSOR POSITION

(a) If moving distance (A) is shorter than (B).[*1]

(1) Move the shift lever to N.

(2) Loosen the 2 bolts.





(3) Slightly turn the shift lever position sensor counterclockwise.





HINT
If the shift lever is moved from R to N, the moving distance of the shift lever from the original point to the gear activation point becomes longer.

(4) Tighten the 2 bolts in the order shown in the illustration.





Torque : 13 Nm (133 kgf-cm, 10 ft-lbf)

(5) Recheck the shift lever position sensor.

(b) If moving distance (B) is shorter than (A) [*2]

(1) Move the shift lever to N.

(2) Loosen the 2 bolts.





(3) Slightly turn the shift lever position sensor clockwise.





HINT
If the shift lever is moved from D to N, the moving distance of the shift lever from the original point to the gear activation point becomes longer.

(4) Tighten the 2 bolts in the order shown in the illustration.





Torque : 13 Nm (133 kgf-cm, 10 ft-lbf)

(5) Recheck the shift lever position sensor.