Installation

2AR-FXE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

(a) Install a new gasket to the engine coolant temperature sensor.

(b) Using a 19 mm ball joint lock nut wrench, install the engine coolant temperature sensor.

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

NOTICE:
Use the torque value compensation formula to calculate the torque value for use when a torque wrench is combined with a tool such as a ball joint lock nut wrench Service Precautions.

HINT
Perform "Inspection After Repair" after replacing the engine coolant temperature sensor Programming and Relearning.

(c) Connect the engine coolant temperature sensor connector.

(d) Install the wire harness with the 2 bolts.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(e) Connect the ventilation hose to the cylinder head cover.

2. INSTALL INLET AIR CLEANER ASSEMBLY Installation

3. INSTALL COOL AIR INTAKE DUCT SEAL Installation

4. ADD COOLANT (for Engine) Coolant (for Engine)

5. INSPECT FOR COOLANT LEAK (for Engine) Testing and Inspection

6. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation