Part 1
NETWORKING: CAN COMMUNICATION SYSTEM: TERMINALS OF ECU
13. STEERING SENSOR
(a) Disconnect the cable from the negative (-) auxiliary battery terminal.
(b) Disconnect the steering sensor connector.
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
14. POWER STEERING ECU ASSEMBLY
(a) Disconnect the cable from the negative (-) auxiliary battery terminal.
(b) Disconnect the power steering ECU assembly connectors.
Text in Illustration
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
15. AIRBAG SENSOR ASSEMBLY
(a) Disconnect the cable from the negative (-) auxiliary battery terminal.
(b) Disconnect the airbag sensor assembly connector.
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
16. SMART KEY ECU ASSEMBLY (CERTIFICATION ECU)
Text in Illustration
(a) Disconnect the cable from the negative (-) auxiliary battery terminal.
(b) Disconnect the smart key ECU assembly (certification ECU) connector.
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
17. RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type w/o Intuitive Parking Assist System)
Text in Illustration
(a) Disconnect the cable from the negative (-) auxiliary battery terminal.
(b) Disconnect the radio and display receiver assembly connectors.
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
*1: for 6 speakers
*2: for 10 speakers
18. NAVIGATION ECU SUB-ASSEMBLY (for Radio and Display Type w/ Intuitive Parking Assist System)
Text in Illustration
(a) Disconnect the cable from the negative (-) auxiliary battery terminal.
(b) Disconnect the navigation ECU sub-assembly connectors.
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
19. NAVIGATION ECU SUB-ASSEMBLY (for Navigation Receiver Type)
Text in Illustration
(a) Disconnect the cable from the negative (-) auxiliary battery terminal.
(b) Disconnect the navigation ECU sub-assembly connectors.
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
20. AIR CONDITIONING AMPLIFIER ASSEMBLY
(a) Disconnect the cable from the negative (-) auxiliary battery terminal.
(b) Disconnect the air conditioning amplifier assembly connector.
Text in Illustration
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
21. CLEARANCE WARNING ECU ASSEMBLY
(a) Disconnect the cable from the negative (-) auxiliary battery terminal.
(b) Disconnect the clearance warning ECU assembly connector.
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
22. BLIND SPOT MONITOR SENSOR LH (w/ Blind Spot Monitor System)
Text in Illustration
(a) Disconnect the cable from the negative (-) auxiliary battery terminal.
(b) Disconnect the blind spot monitor sensor LH connector.
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
23. BLIND SPOT MONITOR SENSOR RH (w/ Blind Spot Monitor System)
Text in Illustration
(a) Disconnect the cable from the negative (-) auxiliary battery terminal.
(b) Disconnect the blind spot monitor sensor RH connector.
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
24. YAW RATE SENSOR (SEPARATE TYPE YAW RATE SENSOR)
(a) Disconnect the cable from the negative (-) auxiliary battery terminal.
(b) Disconnect the connector of the yaw rate sensor.
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
