Installation

HYBRID / BATTERY CONTROL: ACCELERATOR PEDAL SENSOR: INSTALLATION

1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
* Avoid physical shock to the accelerator pedal sensor assembly.
* Do not disassemble the accelerator pedal sensor assembly.

(a) Temporarily install the accelerator pedal sensor assembly with the 2 bolts.





(b) Tighten the 2 bolts in the order shown in the illustration.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(c) Connect the connector.