Initialization

METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: INITIALIZATION

1. MAINTENANCE REQUIRED REMINDER RESET PROCEDURE

HINT
The ODO/TRIP change switch is located on the right side of the combination meter assembly.

(a) Turn the power switch on (IG).

(b) Press the ODO/TRIP change switch until the TRIP A meter appears.

(c) Turn the power switch off.

(d) Turn the power switch on (IG) while pressing and holding the ODO/TRIP change switch. Hold the ODO/TRIP change switch until the following conditions are met and 5 seconds have elapsed.

(1) The TRIP A meter shows "000000".

(2) The multi-information display shows that the reset is complete.