Removal

THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR (for Front Floor): REMOVAL

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

2. REMOVE FRONT PANEL GARNISH LH Removal

3. REMOVE FRONT PANEL GARNISH RH Removal

4. REMOVE REAR CONSOLE UPPER PANEL SUB-ASSEMBLY Removal

5. REMOVE UPPER CONSOLE BOX SUB-ASSEMBLY Removal

6. REMOVE NO. 4 CONSOLE BOX DUCT Removal

7. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

(a) Disengage the clamp.





(b) Remove the bolt.

(c) Disconnect the connector and remove the No. 1 indoor electrical key antenna assembly.

NOTICE:
Be careful when removing the indoor electrical key antenna assembly. If the antenna is dropped, replace it with a new one.