Freeze Frame Data

PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM: FREEZE FRAME DATA

1. FREEZE FRAME DATA

(a) Whenever a DTC is detected, the blind spot monitor sensor stores the current vehicle (sensor) state as Freeze Frame Data.

2. CHECK FREEZE FRAME DATA

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the blind spot monitor main switch (warning canceling switch assembly) on.

(d) Turn the Techstream on.

(e) Enter the following menus: Body Electrical / Blind Spot Monitor Master or Blind Spot Monitor Slave / Trouble Codes.

(f) According to the display on the Techstream, select the trouble code data display with Freeze Frame Data.

Blind Spot Monitor Master





Blind Spot Monitor Slave





3. CLEAR FREEZE FRAME DATA

NOTICE:
Clearing the DTCs will also clear the Freeze Frame Data

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the blind spot monitor main switch (warning canceling switch assembly) on.

(d) Turn the Techstream on.

(e) Clear the DTC and Freeze Frame Data.